Epson AcuLaser C3000 Series User Manual page 66

a. Offset
b. Uses the settings
specified on the printer
button:
c. Uses the settings
specified on the driver
button:
d. Ignore the selected
paper size check box:
e. Auto Continue check
box:
f. Data Compression
Level:
g. Automatically change
to monochrome mode
check box:
66
Using the Printer Software with Windows
Makes fine adjustments to the
printing position on the front and
the back of data on a page in 1 mm
increments.
Select this button to use the
settings specified on the control
panel.
Select this button to use the
settings specified in the printer
driver.
When you select this check box,
the printer prints on loaded paper,
regardless of size.
Select this check box to clear errors
automatically and continue
printing after a given time (about
5 seconds) when Paper Set, Print
Overrun, or Mem Overflow
occurs.
Select the compression level for
image data from the drop-down
list. For example, selecting Low
(Higher Quality) provides better
print quality, but slows the
printing speed.
Select this check box to have the
printer driver analyze the
printing data, and automatically
switch to monochrome mode if
the printing data is black and
white.