Printing With The Duplex Unit - Epson AcuLaser C3000 Series User Manual

Note:
To remove the saved watermark, select it from the List box, then click
Delete. After removing it, be sure to click Save to close the dialog
box.
6. Select the saved custom watermark from the Watermark
drop-down list on the Layout dialog box, then click OK.

Printing with the duplex unit

Duplex printing prints on both sides of the paper. When printing
for binding, the binding edge can be specified as required to
produce the desired page order.
E
As an NERGY
the double-sided printing function. Refer to
Compliance for more information on the
program.
1. Click the
Layout dialog box appears.
2. Select the Duplex check box.
3. Select a Binding position from Left, Top, or Right.
4. Click Duplex Settings to open the Duplex Settings dialog box.
110
Using the Printer Software with Macintosh
®
S
TAR partner, Epson recommends the use of
Layout icon on the Basic Settings dialog box. The
E S
NERGY TAR
E S
NERGY TAR
®
®