Removing A Memory Module - Epson AcuLaser C3000 Series User Manual

Note for Macintosh users:
When you have attached or removed printer options, you need to delete
the printer using Chooser (for Mac OS 9), Print Setup Utility (for
Mac OS X 10.3), or Print Center (for Mac OS X 10.2 or below), and
then re-register the printer.

Removing a memory module

Follow these steps to remove a memory module:
Caution:
c
Before you remove a memory module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
Warning:
w
Be careful when working inside the printer as some components
are sharp and may cause injury.
1. Turn the printer off and unplug the power cord.
* OFF
2. Remove all interface cables from the interface connectors.
176
Installing Options