Labels - Epson AcuLaser C3000 Series User Manual

c
Min.
139.7 mm
Note:
Envelopes that are DL size (220
not meet the minimum size requirement shown above.

Labels

You can load up to 10 mm thickness of labels into the MP tray at
a time. However, you may need to feed some labels one sheet at
a time, or load them manually.
Note:
❏ Duplex printing is not available for labels.
❏ Depending on the quality of labels, the printing environment, or the
printing procedure, labels might be wrinkled. Make a trial print run
before you print on a lot of labels.
Caution:
Make sure that the minimum size of envelopes meets the
following size requirements:
Height: 139.7 mm
Width: 88.9 mm
Min.
88.9 mm
Min.
139.7 mm
Min.
88.9 mm
×
110) can be used even if they do
Paper Handling
2
2
2
2
2
2
2
2
2
2
2
2
43