Epson AcuLaser C3000 Series User Manual page 44

The following table shows important settings you have to make
when using labels.
Paper Source
Menu
Printer driver settings
Note:
❏ You should only use labels designed for monochrome laser printers
or monochrome plain-paper copiers.
❏ To prevent the label adhesive from coming into contact with printer
parts, always use labels that completely cover the backing sheet, with
no gaps between the individual labels.
❏ Press a sheet of paper on top of each sheet of labels. If the paper sticks,
do not use those labels in your printer.
❏ You may have to make the setting
Setup Menu.
* When using especially thick labels, set Paper Type to
44
Paper Handling
setting in the Tray
MP tray (up to 10 mm thickness)
or
Paper Size: A4, LT
Paper Source: MP Tray
Paper Type: Labels
* for Paper Type in the
.