Setup - Display Mode - Speco D4VS User Manual

4-5. Setup – DISPLAY Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control. To return to
the previous setup menu screen, press the ESC button.
Item
OSD
OSD CONTRAST
MAIN MONITOR
SEQUENCE
SEQUENCE
DWELL TIME
SITE
Figure 4.5.1. DISPLAY Setup Screen
Table 4.5.1. Menu Items in DISPLAY Setup Screen
Enable/Disable displaying CHANNEL NAME, VIDEO LOSS and
STATUS BAR & ICON.
Set the visibility level of the On Screen Display (OSD) (50~100)
Enable/disable sequential display of video in full screen mode.
Set the dwell time of each,
Single channel display time in sequence mode (3~60 seconds)
Select a channel to apply the name and covert settings change using the
mouse or the remote control.
Description
36