Gateway NV55 Service Manual page 69

www.gateway.com
5
Insert the retaining tabs of the new keyboard into the slots located on the
top side of the touchpad area.
6
Reach underneath the keyboard and insert the keyboard cable to its system
board connector, then close the clip to lock the cable in place.
Important
The keyboard cable is correctly oriented if it is not twisted.
7
Gently press the keyboard down until it is flat all the way across.
8
Reinstall the keyboard cover by performing steps
keyboard cover"
9
Reinstall the battery.
procedure on page 58.
9–13 of the "Replacing the
63