Replacing The Lcd Assembly Lid - Gateway NV55 Service Manual

Replacing the LCD assembly lid

Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver
Screws removed during this task:
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinges - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinges - top)
•
•
2 chrome M2×4 (LCD hinge covers)
•
•
To replace the antennas:
1
Complete the steps in
2
Remove the LCD panel assembly by performing steps
"Replacing the LCD panel assembly"
3
Remove the LCD front panel by performing steps
LCD front panel"
4
Remove the LCD by performing steps
procedure on page
5
If you are going to use the same Kensington lock cap, power button
assembly, webcam, microphone and wireless antennas, remove these items
from the old LCD assembly lid and attach them to the new one. Refer to
the related replacement procedure on previous pages for instructions.
6
Place the LCD on the new LCD assembly lid.
7
Return the hinge screws to their places.
www.gateway.com
or Non-marring plastic scribe
4 black M2.5×6+Nylok (LCD front panel)
4 black M2.5×6+Nylok (LCD front panel)
4 black M2.5×5 (LCD panel hinges)
"Preparing the notebook" on page
procedure on page
100.
2–15
procedure on page
3–7 of the
95.
4–7 of the "Replacing the LCD"
47.
of the
64.
"Replacing the
113