Adding Or Replacing Memory Modules - Gateway NV55 Service Manual

Adding or replacing memory modules

50
CHAPTER 3: Replacing notebook components
Important
Use only memory modules designed for this Gateway notebook.
Tools you need to complete this task:
Phillips #0 screwdriver
To add or replace memory modules:
1
Complete the steps in
2
Complete the steps in
3
If you are replacing a memory module, go to
If you installing an additional memory module, go to
4
Use a non-marring plastic scribe to push out the latches on both sides of
the memory slot until the module tilts upward.
5
Remove the memory module from its slot.
Non-marring plastic scribe
"Preparing the notebook" on page
"Removing the bay cover" on page
47.
49.
step 4.
step 6.