Replacing The Lcd Panel Hinge Brackets - Gateway NV55 Service Manual

Replacing the LCD panel hinge brackets

Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver
Screws removed during this task:
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinges - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinges - top)
•
•
2 chrome M2×4 (LCD hinge covers)
•
•
•
To replace the LCD:
1
Complete the steps in
2
Remove the LCD panel assembly by performing steps
"Replacing the LCD panel assembly"
3
Remove the LCD front panel by performing steps
LCD front panel"
4
Remove the LCD by performing steps
procedure on page
5
Remove the screws securing the LCD panel brackets.
www.gateway.com
or Non-marring plastic scribe
4 black M2.5×6+Nylok (LCD front panel)
4 black M2.5×6+Nylok (LCD front panel)
4 black M2.5×5 (LCD panel hinges)
4 chrome M2×3 (LCD panel brackets)
"Preparing the notebook" on page
procedure on page
100.
2–15
procedure on page
3–7 of the
95.
4–7 of the "Replacing the LCD"
47.
of the
64.
"Replacing the
103