Replacing The Keyboard Cover - Gateway NV55 Service Manual

Replacing the keyboard cover

58
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver
Screws removed during this task:
•
3 black M2.5×6 (keyboard cover)
To replace the keyboard cover:
1
Complete the steps in
2
Complete the steps in
3
Remove the screws securing the keyboard cover.
4
Turn the notebook over and open the LCD panel to its fully extended position.
5
Insert a small flat-blade screwdriver or non-marring scribe between the LCD
hinge side and the keyboard cover, and carefully pry the cover up.
or Non-marring plastic scribe
"Preparing the notebook" on page
"Removing the battery" on page
47.
48.