Replacing The Kensington Lock Cap - Gateway NV55 Service Manual

Replacing the Kensington lock cap

Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver
Screws removed during this task:
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinges - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinges - top)
•
•
2 chrome M2×4 (LCD hinge covers)
•
•
3 black (Kensington lock cap)
To replace the Kensington lock cap:
1
Complete the steps in
2
Remove the LCD panel assembly by performing steps
"Replacing the LCD panel assembly"
3
Remove the LCD front panel by performing steps
LCD front panel"
4
Move the LCD, webcam, microphone, and antenna cables away from the
Kensington lock cap screws.
www.gateway.com
or Non-marring plastic scribe
4 black M2.5×6+Nylok (LCD front panel)
4 black M2.5×6+Nylok (LCD front panel)
"Preparing the notebook" on page
procedure on page
2–15
procedure on page
3–7 of the
95.
47.
of the
64.
"Replacing the
107