4. Click the
Advanced
5. Check your wireless card or adapter's device settings. (Depending
on the type of card or adapter you're using, some of the settings
may be different than those listed here.)
Set the network type to
■
Set the SSID to match the name assigned to the access point
■
(which should also be the projector's ESSID)—for example,
CONF ROOM
■
Make sure encryption is
6. Click the
General
adapter is enabled.
7. When done making the settings, click
properties dialog box.
tab. You see a screen like this:
Infrastructure
.
.
Disabled
tab and make sure that your wireless card or
OK
.
to close the wireless
Presenting Through a Wireless Network
83