Epson PowerLite 7850p User Manual page 143

■ To enter numbers using the remote control, press the
button until it lights, then use the number keypad shown
below.
Num button
■ To change the network addresses from the projector's control
panel, press the right and left arrow buttons to select the part
of the address you want to enter, then use the up and down
arrow buttons to increase or decrease the numeric value.
Select the
part of the
address to
change
When you finish changing an address in the network menu, press
the button (on the remote control) or the
Enter
button (on the projector). This stores the value.
5. When done making all necessary changes, press
menu system.
Num
Zero
Increase
or
decrease
the value
Auto/Enter
to exit the
ESC
Managing Projectors
143