Adjusting Color Corrections For A New Surface; Operating Your Computer With The Remote Control - Epson PowerLite 7850p User Manual

Using the Remote Control
44

Adjusting Color Corrections for a New Surface

Adjust the correction values if you're projecting on a new surface or in
a new location.
1. Press the
Wall Shot
while you're projecting an image. Wait for the Wall Shot status
screen.
2. Press the
Wall Shot
on the status screen.
Readjustment
You see a sequence of colors flash for about five seconds as the
projector adjusts the color correction values for the new
projection surface.
Operating Your Computer with the
Remote Control
If you've connected a computer to the projector with a USB cable, as
described on page 56, you can use the remote control in place of your
computer's mouse. This gives you more flexibility when delivering
PowerPoint and other slideshow-style presentations, since you won't
have to stand next to the computer to change slides.
Use to
move cursor
Left-click
button on the remote control or projector
button until you see
Wall Shot
Right-click