Epson PowerLite 7850p User Manual page 63

Connecting Using a BNC-style Cable
1. Locate a BNC-style video cable (one may be included with your
video equipment).
2. Connect the cable between your player and the corresponding
connectors on the projector.
R/G/B
3. If you want to play sound through the projector, see page 65 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 1
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image. Once the projector is turned
on, be sure to:
Enter the projector's Setting menu, then change the BNC
■
Input setting to
■ After exiting the menu system, press the
remote control or press the
projector repeatedly to select the correct image source
(
BNC (RGB-Video)
(see page 137).
RGB-Video
Video/BNC
should appear on the screen).
Connecting to Computers, Cameras, and Other Equipment
button on the
BNC
button on the
note
Be sure your video player is
not a component video
source. If you set the wrong
source, image quality may
suffer. Check your video
player's documentation.
63