Epson PowerLite 7850p User Manual page 81

3. For Key ID, highlight any of the options and press
using 40 bit WEP encryption. (This option is not available for
128 bit WEP encryption.)
4. Highlight the
Encryption key
cursor turns green to indicate you are in input mode. Check with
your network administrator for directions on entering a key for
your network, and follow these general guidelines:
For 128 bit WEP encryption with hexadecimal input, enter
■
26 characters, from 0 to 9 and from A to F.
■ For 40 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■ For 128 bit WEP encryption with text input, enter 13 letters
of the alphabet.
■ For 40 bit WEP encryption with text input, enter 5 letters of
the alphabet.
5. When done making your settings, highlight the
top of the screen and press
the button again and press
OK
Network Screen.
Continue with the section below to set up your Windows computer
for wireless projecting, or go to "Setting Up Your Macintosh for
Access Point Mode" on page 87.
Configuring the Network Settings for Windows
Before connecting to the projector, you need to make sure the settings
for your computer's wireless card or adapter match the settings you
entered for the projector.
1. Access your wireless network Properties window. For example, in
Windows XP you would click
and Internet Connections
icon.
Connections
text box and press
OK
. On the next screen, highlight
Enter
to return to the EasyMP
Enter
Start > Control Panel > Network
. Then click the
Network
if you're
Enter
. The
Enter
note
To enter numbers with the
remote control, press the
Num
up, numeric keypad mode is
active. Press the
button again to exit numeric
keypad mode.
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try
first. If that doesn't work,
try
button at the
Presenting Through a Wireless Network
button. When it lights
Num
Text1
and then .
Text2 Text3
81