Freemotion GYM User Manual page 8

TIGHTENING THE CABLE
Woven cable, the type of cable used on the weight
system, can stretch slightly when it is first used. If
there is slack in the Cable (33) when the arms are in
the straight up position before resistance is felt, the
Cable should be tightened. Note: There will be slack
in the Cable when the arms are in any other position.
Slack can be removed from the Cable (33) by moving
either or both of the indicated 4 1/2" Pulleys (34) in
the brackets on the Top Weight (15). First, loosen a
3/8" x 2 1/2" Bolt (77) and a 3/8" Nylon Locknut (63),
and move the Pulley down. Then, retighten the Bolt
and Nylon Locknut.
Note: If the Cable (33) tends to slip off the pulleys,
the Cable may have become twisted. Remove the
Cable and re-install it. If the Cable needs to be
replaced, see ORDERING REPLACEMENT PARTS
on the back cover of this manual.
77 f
Bracket
j 34
63