Assembly - Freemotion GYM User Manual

ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight system can be assembled suc-
cessfully by anyone. Most people find that by
setting aside plenty of time, assembly will go
smoothly.
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight system, make sure
all parts are oriented as shown in the drawings.
An Allen wrench Wand the following tools (not
included) are required for assembly:
Two adjustable wrenches
One standard screwdriver
One Phillips screwdriver
Lubricant, three grease packs are included.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Before beginning assembly, make sure yo u
understand the information in the bOX
above. Important: Some of the parts
described in the assembly steps may be
pre-assembled,
Attach a Stabilizer (3) to the bottom of the Frame
(1), as shown, with four 3/8" x 3 1/2" Button Head
Screws (58), eight 3/8" SAE Washers (55), and
four 3/8" Nylon Locknuts (63).
Attach the other Stabilizer (3) to the other side
of the Frame (1) in the same manner.
58
55
55