Loading Paper In The Multi Purpose Tray - Kyocera ECOSYS FS-C8520MFP Operation Manual

Common Operations > Loading Paper

Loading Paper in the Multi Purpose Tray

The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m²) or up to 25 sheets of plain paper
(80 g/m²) lager than A4.
The multi purpose tray accepts paper sizes from A3 to A6 and Hagaki and from Ledger to Statement-R, 8K, 16K-R and
16K. Be sure to use the multi purpose tray when you print on any special paper.
IMPORTANT
When using media types other than plain paper (such as recycled or colored paper), always specify the media
type setting. (Refer to Cassette/MP Tray Settings on page 9-8.) If you are using a paper weight of 106 g/m² or
more, set the media type to Thick.
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m²), recycled paper or color paper: 100 sheets
• B4 or larger plain paper (80 g/m²), recycled paper or color paper: 25 sheets
• Hagaki: 20 sheet
• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Monarch, Youkei 4, Youkei 2: 5 sheets
• Heavy paper (106 to 256 g/m²): 10 sheets (when using heavy paper with a weight of 164 g/m² or greater, only A4/
Letter or smaller sheets can be loaded)
NOTE
When you load custom size paper, enter the paper size by referring to Paper Size on page 9-8.
When you use special paper such as thick paper, select the media type by referring to Media Type on page 9-8.
1
Adjust the multi purpose tray size.
1
2
When loading paper sizes from A3 to B4 and Ledger to Legal, extend the support tray section
of the multi purpose tray.
3-5