Common Operations > Using Various Functions
Paper Output
Set paper output to document finisher or job separator tray.
Inner Tray*
Finisher Tray*
Job Separator Tray
*
If the optional document finisher has been installed, [Inner Tray] will change to [Finisher Tray].
NOTE
To change default destination, refer to Paper Output on page 9-13 for details.
1
2
Places pages face down in the inner tray.
Places pages face down in the optional document finisher tray.
Places pages face down in the job separator tray.
Display the screen.
1
Referring to Using Various Functions on page 3-30, display the screen.
2
Press [Functions] and then [Paper Output].
Ready to copy. (Full Color)
Copy
Paper
Zoom
Selection
Auto
100%
Duplex
Combine
1
1-sided>>1-sided
Off
Functions
Select the output destination.
Ready to copy. (Full Color)
Paper Output
Inner tray
Job Separator
Tray
Cancel
10:10
Copies
Density
Normal 0
Collate/
Offset
Collate
Favorites
10:10
OK
3-43
Ready to copy. (Full Color)
Functions
Original Size
Original Orientation
Top Edge on Top
2
Mixed Size Originals
Paper Output
Close
Use [
] or [
] to scroll up and down.
Print from
Copy
USB
10:10
Auto
1/5
Off
Inner tray
Add/Edit
Shortcut