Kyocera ECOSYS FS-C8520MFP Operation Manual page 344

Troubleshooting > Responding to Messages
Code Error
1104 Failed to send the e-mail.
1105 Failed to send via SMB.
Failed to send the e-mail.
Failed to send via FTP.
1106 Failed to send the e-mail.
1131 Failed to send via FTP.
1132 Failed to send via FTP.
2101 Failed to send via SMB.
Failed to send via FTP.
Failed to send the e-mail.
2102 Failed to send via FTP.
2103
Failed to send the e-mail.
2201 Failed to send the e-mail.
2202 Failed to send via FTP.
2203 Failed to send via SMB.
2231 Failed to send via FTP.
2204 Failed to send the e-mail.
Corrective Actions
Check the e-mail address.
NOTE: If the address is rejected by the domain, you cannot
send the e-mail.
Select [On] of the SMB settings on the Command Center RX.
Select [On] of the SMTP settings on the Command Center RX.
Select [On] of the FTP settings on the Command Center RX.
Check the sender address of SMTP on the Command Center RX.
Select [On] of the secure protocol settings on the Command
Center RX.
Check the followings of the FTP server.
• Is FTPS available?
• Is the encryption available?
Check the network and SMB settings.
• The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• Host name and IP address
• Port number
Check the network and FTP settings.
• The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• Host name and IP address
• Port number
Check the network and Command Center RX.
• The network cable is connected.
• The hub is not operating properly.
• POP3 server name of the POP3 user
• SMTP server name
Check the followings of the FTP server.
• Is FTP available?
• The server is not operating properly.
Check the network.
• The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
Check the network.
• The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
Check the e-mail size limit of the SMTP settings on the Command
Center RX.
10-24
Reference
Page
6-20
2-26
2-26
2-26
2-26
2-26
—
—
2-26