Setting Twain Driver - Kyocera ECOSYS FS-C8520MFP Operation Manual

Preparation before Use > Installing Software

Setting TWAIN Driver

Register this machine to the TWAIN Driver.
1
2
3
Display the screen.
1
Select Start button of the Windows display, All Programs, Kyocera and then TWAIN
Driver Setting. TWAIN Driver screen appears.
2
Click Add.
Configure TWAIN Driver.
1
2
3
4
6
5
7
NOTE
When the machine's IP address is unknown, contact Administrator.
Finish registering.
NOTE
Click Delete to delete the added machine. Click Edit to change names.
Enter the machine name.
Select this machine from the list.
Set units of measurement.
Enter the machine's IP address or host name.
When using SSL, select the checkbox beside SSL.
2-20
When user login administration is enabled,
select the checkbox beside Authentication,
and enter Login User Name (up to 321
characters) and Password (up to 64
characters).
When job accounting is enabled, select the
checkbox beside Account ID, and enter the
account ID as many as eight digits.