Interface Settings; Network - Ricoh MP161SPF General Settings Manual

System Settings

Interface Settings

This section describes the user tools in the Interface Settings menu under System
Settings.
Default settings are shown in bold type.
2

Network

This section describes the user tools in the Network menu under Interface Set-
tings.
For machines with the DDST Unit, see "Settings You Can Change With User
Tools", Network Guide.
❖ Machine IPv4 Address
Before using this machine in the network environment, you must specify the
IPv4 address and subnet mask.
When you select [Specify], enter the [IP Add.] and [Subnet M] as
"xxx.xxx.xxx.xxx"("x" indicates a number).
• Auto-Obtain (DHCP)
• Specify
IPv4 Address: 011.022.033.044
Sub-net Mask: 000.000.000.000
The default setting is Specify.
The default setting for IPv4 Address is 011.022.033.044.
When you select [Specify], make sure that [IP Add.] is different from that of an-
other machines on the network.
The physical address (MAC address) also appears.
❖ IPv4 Gateway Address
A gateway is a connection or interchange point between two networks.
Specify the gateway address for the router or host computer used as a gate-
way.
The default setting is 000.000.000.000.
❖ Machine IPv6 Address
Specify the machine's IPv6 network address.
• Link-local Address
The machine's specified link-local address appears.
• Manual Config. Address
The machine's manually configuration address appears.
• Stateless address: 1-5
The specified stateless address appears.
❖ IPv6 Gateway Address
Displays the machine's IPv6 gateway address appears.
48