Tray Paper Settings - Ricoh MP161SPF General Settings Manual

System Settings

Tray Paper Settings

This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.
Important
2
❒ If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖ Paper Size: Tray 1 -2
Select the size of the paper loaded in the paper tray.
• The paper sizes you can set for Tray 1 are as follows:
A4L, A5K, B5 JISL, 8
The default setting is A4L / 8
• The paper sizes you can set for Tray 2 are as follows:
A4L, 8
The default setting is A4L / 8
❖ Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when using the printer func-
tion. You can select paper size from Custom size or Regular size.
• The paper sizes you can set for bypass tray are as follows:
A4L, A5K, A5L, B5 JISL, C6 EnvL, C5 EnvL, DL EnvL, 8
1
8 / "×13"L, 8
2
1
5 / "×8
2
Size
You can specify a custom size as follows:
90.0 to 216.0 mm (3.55 to 8.50 inch) vertically, and 139.0 to 600.0 mm (5.48
to 23.62 inch) horizontally.
The default setting is A4L / 8
❖ Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
• The paper types you can set for the bypass tray are as follows:
No Display (Plain Paper), Recycled Paper, Special Paper, Color Paper, Let-
terhead, Label Paper, Thick Paper, OHP (Transparency), Preprinted Paper,
Prepunched Paper, Bond Paper, Cardstock.
The default setting is Thick Paper.
Paper types you can set in the bypass tray for machines with the copy func-
tion only are plain paper, thick paper and OHP.
44
1
/
2
1 1
/ "×14"L, 8 / "×13"L, 8
2 2
1
/ "×11"L, 8
2
1 1 1
/ "K, 5 / "×8 / "L, 4
2 2 2
1 1
"×11"L, 5 / "×8 / "K, 16KL
2 2
1
/ "×11"L.
2
1
/ "×11"L, 8
2
1
/ "×11"L.
2
1
/ "×13"L, 8"×13"L, 7
4
1 1 7
L, 3
/ "×9 / /
8 2
1
/ "×11"L.
2
1 1
/ "×14"L, 8 / "×13"L
4 4
1
/ "×14"L,
2
1 1
/ "×10 /
4 2
1
"×7 / "L, 16KL, Custom
8 2
"L,