Home Position - Ricoh MP161SPF General Settings Manual

Home Position

Specify the type of original immediately after the power is turned on and when
the {Clear Modes} key is pressed.
❖ Home Position
• Image Density
Allows one of five image density steps to be set as the home position.
For details, see "Image Density (Contrast)", Facsimile Reference.
• Resolution
Allows either Standard, Details, or Fine to be set as the home position.
For details, see "Resolution", Facsimile Reference.
• Original Type
Allows either Text or Photo to be set as the home position.
For details, see "Original Type", Facsimile Reference.
• Home Position
Enables or disables the home position settings. When Home Position is set
to on, the home position settings are enabled and items return to their
home positions when scanning and transmission are completed.
• Transmission Mode
Allows either Immediate Transmission or Memory Transmission to be set
as the home position.
For details, see "Transmission Modes", Facsimile Reference.
• Label Insertion
Allows the label insertion as the home position to be set to on or off.
For details, see "Label Insertion", Facsimile Reference.
• Auto Reduce
Allows the auto reduce as the home position to be set to on or off. When
set to on, if the receiver's paper is smaller than the paper you are sending
on, the message is automatically reduced to fit onto the paper available at
the other end.
If you turn this function off, the scale of the original is maintained and
some parts of the image may be lost at the other end.
• Fax Header
Allows the fax header as the home position to be set to on or off.
For details, see "Fax Header Print", Facsimile Reference.
Home Position
4
113