Setting Up Remote Operator Panel; Exporting And Importing A Configuration - Lexmark MX610 User Manual

Setting up and using the home screen applications
To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the
printer display.

Setting up Remote Operator Panel

This application shows the printer control panel on your computer screen and lets you interact with the printer control
panel, even when you are not physically near the network printer. From your computer screen, you can view the printer
status, release held print jobs, create bookmarks, and do other print-related tasks you might normally do while standing
at the network printer.
1
Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2
Click Settings > Remote Operator Panel Settings.
3
Select the Enabled check box, and then customize the settings.
4
Click Submit.
To use the application, click Remote Operator Panel > Launch VNC Applet.

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.
1
Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2
To export or import a configuration for one application, do the following:
a
Click Settings > Apps > Apps Management.
b
From the list of installed applications, click the name of the application you want to configure.
c
Click Configure, and then do either of the following:
•
To export a configuration to a file, click Export, and then follow the instructions on the computer screen to
save the configuration file.
Notes:
–
When saving the configuration file, you can type a unique file name or use the default name.
– If a "JVM Out of Memory" error occurs, then repeat the export process until the configuration file is
saved.
•
To import a configuration from a file, click Import, and then browse to the saved configuration file that was
exported from a previously configured printer.
Notes:
–
Before importing the configuration file, you can choose to preview it first or load it directly.
–
If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.
27