Faxing; Setting Up The Printer To Fax - Lexmark MX610 User Manual

Faxing

Faxing
Note: Fax capabilities may not be available on all printer models.
Automatic document feeder (ADF)
Use the ADF for multiple‑page documents.

Setting up the printer to fax

CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or
make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning
storm.
Note: The following connection methods are applicable only in select countries or regions.
During the initial printer setup, clear the Fax funtion and any other function you plan to set up later, and then press
Continue.
Note: The indicator light may blink red if the fax function is enabled and not fully set up.
Warning—Potential Damage: Do not touch cables or the printer in the area shown while actively sending or
receiving a fax.
Scanner glass
Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine
clippings).
108