Pcl Emul Menu - Lexmark MX610 User Manual

Understanding the printer menus
Use
Lock PS Startup Mode
On
Off
Font Priority
Resident
Flash/Disk

PCL Emul menu

Use
Font Source
Resident
Disk
Download
Flash
All
Font Name
Courier 10
Symbol Set
10U PC‑8
12U PC‑850
To
Disable the SysStart file.
Note: Off is the factory default setting.
Establish the font search order.
Notes:
•
Resident is the factory default setting.
• This menu item is available only when a formatted flash memory option
card or printer hard disk is installed and operating properly.
• Make sure the flash memory option or printer hard disk is not
read/write‑, write‑, or password‑protected.
• Job Buffer Size must not be set to 100%.
To
Specify the set of fonts used by the Font Name menu.
Notes:
•
"Resident" is the factory default setting. Resident shows the factory
default set of fonts downloaded in the RAM.
• "Flash" and "Disk" settings show all fonts resident in that option.
•
The flash option must be properly formatted and cannot be read/write‑,
write‑, or password‑protected.
• "Download" shows all the fonts downloaded in the RAM.
•
"All" shows all fonts available to any option.
Identify a specific font and the option where it is stored.
Note: Courier 10 is the factory default setting. Courier 10 shows the font
name, font ID, and the storage location in the printer. The font source
abbreviation is R for Resident, F for Flash, K for Disk, and D for Download.
Specify the symbol set for each font name.
Notes:
• 10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
factory default setting.
•
A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
205