Print Settings - Lexmark MX610 User Manual

Understanding the printer menus
Use
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4

Print Settings

Print Settings menu items and their descriptions
Copies
1–999
Paper Source
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Sides (Duplex)
1 sided
2 sided
Staple
Off
On
To
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Enable the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: On is the factory default setting.
Specify whether prints are on one side or on both sides of the page.
Note: "1 sided" is the factory default setting.
Specify whether prints are stapled.
Notes:
•
Off is the factory default setting.
•
This menu appears only when a staple finisher is installed.
196