Table of Contents
Advertisement
Using the Spanning Tree Algorithm
Parameter
Cost
Fast Forwarding
7-12
Device Control Menu Screens
Default
100/19/4
ENABLED
Description
This parameter (path cost) is used by the STA to
determine the best path between devices. Therefore,
lower values should be assigned to ports attached to
faster media, and higher values assigned to ports with
slower media.
(Path cost takes precedence over port priority.)
The default and recommended range is:
Ethernet: 100 (50~600)
Fast Ethernet: 19 (10~60)
Gigabit Ethernet: 4 (3~10)
The full range is 0 - 65535.
Enables or disables the port to forward packets. All
ports currently displayed can be enabled or disabled at
once using the command near the top of the screen.
Advertisement
Table of Contents
