Enterasys 5G1XX Local Management User’s Manual page 51

Parameter
Management
Mode
Baud rate
Data bits
Stop bits
Parity
Time-Out
(in minutes)
Auto Refresh
(in seconds)
Default Description
CONSOLE Indicates that the console port settings are for direct
MODE console connection.
9600 The rate at which data is sent between devices.
Options: 2400, 4800, 9600, and 19200 bps.
8 bits Sets the data bits of the RS232 port.
Options: 7, 8
1 bit Sets the stop bits of the RS232 port.
Options: 1, 2
NONE Sets the parity of the RS232 port.
Options: none/odd/even
10 If no input is received from the attached device after this
interval, the current session is automatically closed.
Range: 0-100 minutes; 0: disabled
5 Sets the interval before a console session will auto refresh
the console information, such as Spanning Tree
Information, Port Configuration, Port Statistics, and
RMON Statistics.
Range: 5-255 seconds; 0: disabled
Configuring the Serial Port
Management Setup Menu Screens 6-9