Parameter
Send Authentication Fail Traps
SNMP Communities
IP Trap Managers
Description
Issues a trap message to specified IP trap managers
whenever authentication of an SNMP request fails. (The
default setting is ENABLED.)
Provides access to the SNMP Communities screen to assign
SNMP access based on specified strings. For details, refer
to
Section
6.4.1.
Provides access to the IP Trap Managers screen to specify
the management stations that will receive authentication
failure messages or other trap messages from the switch.
For details, refer to
Management Setup Menu Screens
Assigning SNMP Parameters
Section
6.4.2.
6-11