Parameter
Type
Operational
Link
Flow Control InUse
Speed and Duplex InUse
Description
Shows port type as:
10/100TX: 10Base-T/100Base-TX
100FX: 100Base-FX
1000SX: 1000Base-SX
1000LX: 1000Base-LX
Shows if the port is, or is not, functioning.
Indicates if the port has a valid connection to an external
device.
Shows the flow control type in use. Flow control can
eliminate frame loss by "blocking" traffic from end stations
connected directly to the switch. Back pressure is used for
half duplex and IEEE 802.3x for full duplex. Note that flow
control should not be used if a port is connected to a hub.
Displays the current port speed and duplex mode used.
Viewing the Current Port Configuration
Device Control Menu Screens
7-7