Enterasys 8000/8600 Getting Started Manual page 52

Enterasys networks network adaptor getting started guide 8000/8600
Table of Contents

Advertisement

Hardware Overview
Number of Flows/Routes
Layer-2 Entries =512,000 (memory size = 32 MB)
Layer-3 Entries = 256,000 (memory size = 16 MB)
Physical Dimensions
Size: 27.94 cm H x 3.94 W x 19.68 D (11.00 in. H x 1.55 W x 7.75 D)
Weight: 1.4 kg (3.0 lbs)
Temperature
Operating: 41° to 104° F (5° to 40° C)
Storage: -22° to 164° F (-30° to 73° C)
Humidity
15% to 90% (non-condensing)
LEDs
LED
Online
Offline
Per-Port
Transmit
Per-Port
Receive
Per-Port
Link
Per-Port
Quality
40
Table 10. SSR-GTX32-04 and SSR-GTX32-02 LED Indicators
Condition
Status
On (Green)
The module is online and ready to receive, process, and send
packets (if configured to do so).
On (Amber)
The module is offline (powered down) and ready to hot swap.
Green
The port transmitted a packet.
Amber
The port transmitted a flow-control packet.
Green
The port received a packet.
Amber
The port received a flow-control packet.
Green
The port hardware detected a cable plugged into the port and
established a good link.
Off
No link exists from the port.
Green
Auto-Negotiation completed successfully and the phy is attempting
to establish a link. This LED remains green while the link operates
with good signal-to-noise ratio.
Fast blink
Low signal-to-noise ratio, close to data errors.
Slow blink
Receive bit errors detected.
Off
Auto-Negotiation is still in progress or the phy cannot receive
packet data.
Enterasys X-Pedition 8000/8600 Getting Started Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

X-pedition 8000X-pedition 8600

Table of Contents