Table of Contents
Advertisement
SSR-GSX31-02
The SSR-GSX31-02 line card contains two independent Gigabit (1000 Mbps) Ethernet ports. The
ports connect to multimode fiber (MMF) cables.
GSX31-02 (T-Series) line card.
LEDs.
LED
Offline
Online
Per-port Link
Per-port Rx
Per-port Tx
Enterasys X-Pedition 8000/8600 Getting Started Guide
SSR-GSX31-02
1
Tx
Link
Offline
Rx
AN
Online
Gigabit Port
Figure 14. Front panel of SSR-GSX31-02 (T-Series) line card
Table 9. SSR-GSX31-02 line card LEDs
Condition
Description
Amber
The line card is offline (powered off) but is ready for hot
swap.
The Offline LED also is lit briefly during a reboot or reset of
the X-Pedition but goes out as soon as the control module
discovers the line card.
Green
The line card is online and is ready to receive, process, and
send packets if configured to do so.
Green
The port hardware detects a cable plugged into the port and a
good link is established.
Red
The port received an error during operation.
(intermittent)
Red (solid)
The port hardware detects a cable plugged into the port,
however, a bad link is established.
Off
No link from the port exists.
Green
The port's transceiver received a packet.
Amber
The port's transceiver received a flow-control packet.
Green
The port's transceiver transmitted a packet.
Amber
The port's transceiver transmitted a flow-control packet.
Figure 14
shows the front panel of the SSR-
1000BASE-SX
2
Tx
Link
Rx
AN
Gigabit Port
Hardware Overview
Hot
Swap
37
Advertisement
Table of Contents
