Enterasys 8000/8600 Getting Started Manual page 31

DC Power Supply Specifications
The following table lists the physical specifications for the X-Pedition's DC power supplies.
Input Voltage
Output Wattage
At 3.4 V
At 5.1 V
At 12 Volts
Dimensions
Weight
The following table lists the environmental specifications for the X-Pedition's DC power supplies.
Operating Temperature
Non-operating Temperature
Operating Humidity
Switching Fabric Module (X-Pedition 8600 only)
On the X-Pedition 8600, the switching fabric is contained on a separate plug-in module. The
X-Pedition 8600 has slots for two of these modules. When two switching fabric modules are
installed, the module in the slot labelled "Fabric 1" serves as the primary switching fabric module,
and the module in the slot labelled "Fabric 2" serves as a redundant switching fabric module.
Figure 8 shows the front panel of the X-Pedition 8600 Switching Fabric module.
SSR-SF-16
Enterasys X-Pedition 8000/8600 Getting Started Guide
X-Pedition 8000
48 to 60 VDC
(14 Amperes Max.)
390 Watts
70 Amps
25 Amps
2 Amps
11.00 in. L x 7.70 W x 2.55 H
27.94 cm L x 19.55 W x 6.47 H
6.5 lb (2.95 kg)
+5 to +40 °C (41 to 104 °F)
-30 to +73 °C (-22 to 164 °F)
15 to 90% (non-condensing)
Offline
Hot
Online
Active
Swap
Offline
Hot
Online
Active
Swap
Figure 8. Front panel of X-Pedition 8600 Switching Fabric module
Hardware Overview
X-Pedition 8600
48 to 60 VDC
(27 Amperes Max.)
780 Watts
140 Amps
50 Amps
4 Amps
12.15 in. L x 7.70 W x 5.05 H
30.86 cm L x 19.55 W x 12.82 H
12.0 lb (5.45 kg)
Switching Fabric
19