Dialing Options; Access Codes And Credit Card Numbers (Mfc-620Cn Only) - Brother FAX-2440C User Manual

Dialing options
_" There are following ways to dial. (See How to dialon page 3-1 .)
Access codes and credit card numbers
(MFC-620CN only)
Sometimes you may want to choose from several long distance
carriers when you make a call. Rates may vary depending on the time
and destination. To take advantage of low rates, you can store the
access codes or long-distance carriers and credit card numbers as
Speed-Dial numbers. You can store these long dialing sequences by
dividing them and setting them up as separate Speed-Dial numbers in
any combination. You can even include manual dialing using the dial
pad. (See Storing Speed-Dial numbers on page 5-2.)
For example, perhaps you have stored '555' on Speed-Dial #03 and
'7000' on Speed-Dial #02. If you press Search/Speed Dial, #03,
Search/Speed Dial, #02, and Black Start or Color Start, you
will dial '555-7000'.
To temporarily change a number, you can substitute part of the
number with manual dialing using the dial pad.
For example, to change the number to 555-7001 you could press
Search/Speed Dial, #03 and then press 7001 using the dialing
pad.
If you must wait for another dial tone or signal at any point in the
dialing sequence, store a pause in the number by pressing
Redial/Pause. Each key press adds a 3.5-second delay.
QUICK-DIAL NUMBERS AND DIALING OPTIONS 5 - 7