Adjusting Copy Quality; Making A Copy Lighter Or Darker; Collating Copies Using The Printer Control Panel - Lexmark Intuition S500 User Manual

Notes:
• If you select Custom %, then press
percent value. Press
• If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to print a
borderless copy on the paper size that you selected. For best results with this resize setting, use photo paper
and set the paper type to Photo, or let the printer automatically detect the paper type.
6
Press .
Note: After the copy job is finished, press
100% after two minutes of printer inactivity.

Adjusting copy quality

1
Load paper.
2
Load an original document faceup into the ADF or facedown on the scanner glass.
3
From the printer control panel, press
4
Press the up or down arrow button to scroll to Quality.
5
Press the left or right arrow button to set the copy quality to Automatic, Draft, Normal, or Photo.
6
Press .

Making a copy lighter or darker

1
Load paper.
2
Load an original document faceup into the ADF or facedown on the scanner glass.
3
From the printer control panel, press
4
Press the up or down arrow button to scroll to Lighter/Darker.
5
Press the left or right arrow button to adjust the slider.
Note: Pressing the left arrow button makes the copy lighter, and pressing the right arrow button makes the copy
darker.
6
Press .

Collating copies using the printer control panel

If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the
copies as groups of pages (not collated).
Collated
, and then press the left or right arrow button to select the desired custom
to save the setting.
to reset the settings to the default. The resize setting also switches to
.
.
Copying
Not collated
55