Lexmark S500 Series Installation Unpack printer Notes: Place the printer near the computer • during setup. If you're setting up on a wireless network, then you may move the printer after setup is complete. Do not attach the USB cable until •...
Page 2
Lexmark S500 Series Installation Raise paper support Raise printer control panel...
Page 3
Lexmark S500 Series Installation Open printer and remove packaged printhead from printer If necessary, insert correct (1) language overlay and install (2) protective cover...
Page 4
Lexmark S500 Series Installation Lock the protective cover in place Close printer Use lever to extend paper guides...
Lexmark S500 Series Installation Load paper Note: Use the lever to adjust the paper guides. Extend paper exit tray Connect power cord only Note: DO NOT attach the USB cable yet. CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting...
Lexmark S500 Series Installation Make sure printer is on Set language Using the printer control panel, press until the language you want is highlighted on the display. Press OK to save. Set country/region Using the printer control panel, press until the country or region you want is highlighted on the display.
Page 7
Lexmark S500 Series Installation Open printer and remove any tape from latch Note: The carriage moves to the printhead installation position as shown. Squeeze and lift latch Remove printhead from disposable container...
Lexmark S500 Series Installation Insert printhead and close latch until it clicks Close printer Open printer Note: The printhead moves to the cartridge installation position as shown.
Page 9
Lexmark S500 Series Installation First, insert each color ink cartridge. Then, use two hands to install black cartridge. Close printer...
Page 10
Lexmark S500 Series Installation Press OK to print alignment page Notes: Do not remove the page until • printing stops. The alignment page may take a while to print and will move in and out during the process. Streaks on the alignment page are •...