Wireless Print Server Not Installed - Lexmark Intuition S500 User Manual

For Macintosh users
1
From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
2
Double-click Wireless Setup Assistant.
3
Follow the instructions on the computer screen.

Wireless print server not installed

You may see a message during installation indicating that the printer does not have a wireless print server installed. If
you are sure the printer is capable of wireless printing, try the following:
C
HECK POWER
Make sure the light is on.
"Communication not available" message displays when printing wirelessly
These are possible solutions. Try one or more of the following:
M
AKE SURE YOUR COMPUTER AND PRINTER HAVE VALID
If you are using a laptop and have power saving settings enabled, you may see the "Communication not available"
message on your computer screen when you attempt to print wirelessly. This can occur if the laptop hard drive has
powered down.
If you see this message, wait a few seconds and then try to print again. The laptop and printer require a few seconds
to power up again and reattach to the wireless network.
If you see this message again after you have waited long enough for the printer and the laptop to attach to the
network, there may be a problem with your wireless network.
Make sure that the laptop and printer have both received IP addresses:
For Windows users
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type cmd.
3
Press Enter, or click OK.
The Command Prompt window opens.
4
Type ipconfig, and then press Enter.
The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.
For Macintosh users
1
From the Apple menu, choose About This Mac.
2
Click More Info.
3
From the Contents pane, choose Network.
4
If you are connected over a wireless network, choose AirPort from the Active Services list.
IP
ADDRESSES FOR THE NETWORK
Troubleshooting
122