Lexmark Intuition S500 User Manual page 45

Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2
From the printer control panel, press
3
Press the up or down arrow button to scroll to Bluetooth Setup, and then press button
4
Press the up or down arrow button to scroll to Security Level, and then press
5
Press the up or down arrow button to select the security level, and then press
•
Select Low to allow Bluetooth devices to connect and send print jobs to your printer without requiring users to
enter a pass key.
•
Select High to require users to enter a four-digit numeric pass key on the Bluetooth device before connecting
and sending print jobs to the printer.
6
The Bluetooth Pass Key menu opens on the operator panel display if you set the security level to High. Press the
arrow buttons to enter the four-digit pass key. Press
Printing from a Bluetooth-enabled device
Note: The printer does not support printing files from your computer using a Bluetooth connection.
1
Insert a USB Bluetooth adapter into the USB port.
Bluetooth Dongle Connected appears on the display.
Warning—Potential Damage: Do not touch cables, any network adapter, any connector, the USB Bluetooth
adapter, or the printer in the areas shown while actively printing, reading, or writing from a Bluetooth-enabled
device. A loss of data can occur.
Notes:
• A Bluetooth adapter is not included with the printer.
•
Your printer automatically switches to Bluetooth mode when you insert a USB Bluetooth adapter.
2
Make sure the printer is set up to receive Bluetooth connections. For more information, see "Setting up a connection
between your printer and a Bluetooth-enabled device" on page 43.
.
each time you enter a number.
o th R
e to
B lu
Printing
45
.
.
.