GE Monogram ZBD6400 Owner's Manual page 23

re and Cleaning/Optional_ Accessories
Dishwasher
VVater Fill
Level
For best pertimnance, check tile water fill level of your
dishwasher:
Once the dishwasher is fillly c(mnected, run it through a
complete RINSE ONI,Y cycle to ensm'e it is emptying and
filling correctl> For low water pressm'e situations rim tile
RINSE ()NIX cycle 3 times. Halfkvay through the final
RINSE ONLY cycle, pause the dishwasher and check the
water level inside the dishwasher: If tile water level is not
above tile minimum water level (marked on tile lower
spray support tower), increase the fill level.
1. Ensure the dishwasher is not framing through a cycle.
Depress the X_TER TEMP button fi)r ten seconds
tmtil the second buzzer s(mnds (except on ZBD6600
models).
2. Press tile START/(_ANCEI, button to select fill time,
as per chart (65 seconds is tile tactory setting).
3. To test time, press DEI,AY START. Tile dishwasher will
start filling. I,isten fi)r tile dishwasher to complete
filling. Once filled, tile fill level must be checked to
ensure fill time is correct.
4. Once complete, press tile X£__TER TEMP button to
exit fill time mode.
MaximUm_m level
Continue to press tile
START/CANCEl, button until tile
desired indicator is illuminated.
Cycle Status
I ndica tots
SENSING
X4;__SHING
RINSING
DRYING
CI,EAN
Fill time
60 seconds
65 seconds
70 seconds
80 seconds
90 seconds
Change the
Dishwasher
A[)[)eararlce./br
ZBD6400 and
ZBD6500 only
You can change tile door panel appearance
of yore" dishwasher by ordering one of these
optional accessories:
• 1/4" Wood Panel Trim 14dt
ZPFG25B (Black)
ZPF625W (White)
• 3/4" Trimless Panel lCdt
ZPFG75B (Black)
ZPE675W (White)
These accessories are awdlable at extra cost bv
calling in tile USA, 800.626.2002. In Canada,
call 1.888.880.3030.
Specit}'
accessory nUlllbei"
when ordering.
23