GE Monogram ZBD6400 Owner's Manual page 14

Control Panel- ZBD7000 & ZBD7100
l) is h w a s h e r
Yot,_ ca_t locate€
your model
number on the
inside upper lub
flange,
Throughout this
manual, J)¢atures
and appearance
may vary J)om
your model.
ZBD7000 & ZBD7IO0
[ Cycle Selections 1
Fq
Control
Settings
1. Cycle Selections--The light on tile selected pad will illumitmte to indicate which cycle has been
selected.
POTS & PANS For heavily-soiled dishes or cookware with dried-on or baked-on soils.
Evervdav dishes mav be included. This cycle mav not remove burned-on toods.
NORMAL For loads of everyday dishes, glasses and cookware with medium soils.
WASH NOTE: For heavily soiled dishes, choose NORMAl, _4;€SH phB HIGH water
temperature option.
CHINA For lightly soiled china and crystal, or recently used, lightly soiled dishes
CRYSTAL and glassware to be washed in a short time at moderate temperatures up to
125°F (51°C).
RINSE ONLY For rinsing partial loads that will be washed later. Do not use detergent with
this cycle.
2. WATER TEMP--
NORMAL
HIGH
SANITIZE
This 1)utton provides extra heat options to increase water teml)erattu'e fi)r
oi)tinmn_ perti)rmance.
This is the detault setting--l)rovides a wash and rinse with water tenq)erattu'es
up to 131°F (55°(;) in the NORMAl, cycle and 145°F (63°(;) in POTS &
PANS.
This water temp selection provides a wash and rinse with water temperatures
up to 135°F (57°C) in tile NORMAl, cvcle and 155°F (68°C) POTS & PANS.
This water temp selection provides a sanitizing wash and rinse with water
teml)eratures up to 160°F (71°C) in tile NORMAl, cycle and 17I°F (77°C) in
POTS & PANS. This selection cannot be used with RINSE ()NIX or CHINA
CRYSTAl,. At the end of the wash cycle, the SANITIZE OPTION light will
remain ilhmfinated to indicate that tile sanitization conditions have been met.
NSF INTERNATIONAL
Meets NSF Standard 184 Sanitization and Cleaning performance
of household spray-type dishwashers.
NOTE: NSF certified residential dishwashers are not intended fin" licensed fi)od establishments.
3. SMART DRY When selected, sensols detect the i)resence of rinse aid and the final rinse
telnl)erature. Tile drying heater and tan are then turned on ti)r tile ininilnuln
time to achieve oi)tim Uln drying results. This saves energy as comi)ared to
conventional heated dry and saves time as compared to non-heated dry.
SMART DRY is not awfilable on RINSE ONI,Y.
14