and Assembly
Disassembly
Removing the Release Sensor
1.
Remove the paper guide assembly, ribbon, top cover, front cover, paper eject cover, and tractor
unit. (See page 4-5.)
2.
Remove the panel unit. (See page 4-6.)
3.
Remove the upper housing assembly. (See page 4-8.)
4.
Remove the printer mechanism. (See page 4-9.)
5.
Remove the platen assembly. (See page 4-10.)
6.
Remove the rear frame assembly. (See page 4-11.)
7.
Remove the two clips for the release sensor mounted on the rear paper guide assembly.
Remove the release sensor.
8.
Disconnect the release lead from the sensor.
Release
4-20
Sensor
Figure 4-21. Removing the Release Sensor
Epson FX-870/1170
-