Self-Test; Power On Default Settings; Table 1-19. Group 3 Features (Power-On Settings) - Epson FX-870 Service Manual

Printer Features
FONT COND. READY
L E D LED
OFF
OFF
O F F B L I N K S
OFF
OFF ON
OFF ON
1.
For table
Notes:
For table 2, codes 80-9FH are printable characters. (ESC 6 is set.)
2. The character tables for ESC/P mode and IBM mode aresaved independently
in non-volatile memory.

Power On Default Settings

The printer also lets you change some of its power on parameters. To change the
settings shown in Table 1-19, Group 3 Features (Power On Settings), follow the steps
below.
1. Turn on the printer while pressing the PAUSE and PAPER FEED buttons.
2. After a few seconds, press the buttons indicatedin Table 1-19 to change parameters.
Button
PAUSE
PAPER FEED
FONT
Notes: 1. Auto CR moves the next print position to the left margin when a LF or the
ESC J code is sent.
few seconds, the printer exits the power on selection mode with five beeps
l l l l
3. The printer automatically becomes ready to print after the selection.

Self-Test

Press PAPER FEED while turning on the printer to put it in self-test mode. To stop
the self-test, turn off the printer. (The control panel is still operational in self-test
mode for paper handling and font selection.) When pages are printed
1-22
LED
Character table PC437 (table 1) (standard)
ON
OFF
ON
codes 80-9FH are control codes. (ESC 7 is set.)
Feature
Input buffer
Draft printing speed
Auto CR
Character Table
PC437 (table 2)
PC865 (table 1)
PC865 (table 2)
Betting
valid p 0) or invalid p)
high p 0) or normal p)
valid p 0) or invalid p)
T
standard (factory) setting
Epson FX-870/1170
the cut-
from