Disassembling The Pf Gear Train - Epson FX-870 Service Manual

Disassembling the PF Gear Train

1. the paper guide assembly, top cover, front cover, paper eject cover, and tractor unit.
Remove
(See page 4-5.)
Remove the panel unit. (See page 4-6.)
2.
3. Remove the upper housing assembly. (See page 48.)
4. Remove the printer mechanism. (See page 4-Q.)
5. Remove the CR motor assembly. (See page 4-12.)
Remove the PF motor assembly. (See page 4-13.)
6.
7. Remove the FFC cables
the two CBS (M3x8) screws securing the right sub frame.
Remove the right sub frame.
8.
to mesh the release lever with the mechanism properly.
Be sure
Figure 4-14. Positioning the Release Lever for
4-14
the right sub fkame of the printer mechanism, and then remove
from
Figure 4-13. Disassembling the PF Gear Train
Assembly Note
Insertion
E p s o n FX-870/1170