Removing the PF Motor Assembly
1.
Remove the paper guide assembly, ribbon, top cover, front cover, paper eject cover, and tractor
unit. (See page 4-5.)
Remove the panel unit. (See page 4-6.)
2.
3.
Remove the upper housing assembly. (See page 4-8.)
4.
the printer mechanism. (See page 4-9.)
Remove
5.
Set the release lever to the vertical or forward position.
6.
Remove the FFC cables and then the two CBS(M3x8) screws securing the PF motor assembly.
7.
Remove the PF motor assembly.
E p s o n FX-870/1170
Lever Positions
Figure 4-12. Removing the PF Motor Assembly
Disassembly and Assembty
(This position does not release
the PF motor assembly)
4-13