Epson FX-875 Quick Start Manual

Start Here
Unpacking
1
Assembling the Printer
2
Confirm the (OFF)
OFF
Slide the print head to the middle
Remove the paper tension unit
of the printer by hand
Start Here
It may come attached to the printer in some
countries.
The shape of the plug may vary by location.
Remove the printer cover
Pull toward you
Pull the ribbon guide until it is out
of the cartridge
Tense
Slide the ribbon guide into the
print head until it clicks in place
Caution:
c
❏ The ribbon should not be
twisted or creased.
❏ When inserting the ribbon
guide, press firmly until it
clicks.
Attach the paper guide
Connecting the Printer to Your Computer
3 Caution:
c
❏ The interface cable connectors have only one correct orientation. Make sure the orientation of the connector is correct
before inserting it into the appropriate port.
❏ Do not connect or disconnect the printer while it is turning on.
USB
Hold with
two fingers
IEEE1284 (PARALLEL)
Continued
Reinstall the paper tension unit
Connect firmly
Connect firmly
Connect firmly
Connect firmly and fasten
Replace the printer cover and
lowering the cover into place
Continued on back