Removing A Jam In The Label Sensor - Epson LX 810 Service Manual

Section 9: Removing a Jam in the Label Sensor
1. Remove the Top Cover (Refer to Section 1 for
Instructions).
2. Remove the Printer Module (Refer to Section 2 for
Instructions).
3. Remove the two T10 torx screws to access the area
under the label sensor.
4. Remove the top portion of the TOF sensor housing.
5. Remove the jammed label stock.
6. Clean the metal components of any label debris
with Isopropyl alcohol.
7. Reinstall all parts.
- 26 -